System x CheatSheet VMware ESX Server - TotalStorage FAStT EXP100 http://www.ibmxseries.com/cheatsheet RSS feed for System x CheatSheets Copyright ibmxseries.com 2006 ibmxseries.com CheatSheet Generator en-us cheatsheet@ibmxseries.com Mon, Dec 4 01:30:44 2006 IBM DS4000 Storage Subsystem controller firmware - Fibre Channel Solutions Thu, 10 Feb 2005 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-56716 Supported systems:
- IBM TotalStorage DS4300 (FAStT 600) dual controller models
- IBM TotalStorage DS4400 (FAStT 700)
- IBM TotalStorage DS4500 (FAStT 900)
- IBM TotalStorage DS4000 EXP100 at ESM 9554 or higher
- IBM TotalStorege DS4000 EXP700 at ESM 9326 or higher
- IBM TotalStorage DS4000 EXP710

Attention: All EXP700s and EXP100s must have firmware 9326 and 9554, respectively, before upgrading controllers to firmware 06.10.xx. For EXP700s, use esm9326.scr from the 1.43 package. For EXP100s, follow the instructions in the esm9554 firmware package README. IBM DS4000 Storage Subsystem controller firmware 06.12.03.xx - IBM TotalStorage Wed, 8 Jun 2005 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-59007 Supported systems:
- IBM TotalStorage DS4100 (FAStT 100) dual controller models
- IBM TotalStorage DS4300 (FAStT 600) dual controller models
- IBM TotalStorage DS4400 (FAStT 700)
- IBM TotalStorage DS4500 (FAStT 900)
- IBM TotalStorage DS4000 EXP100 at ESM 9554 or higher
- IBM TotalStorage DS4000 EXP700 at ESM 9326 or higher
- IBM TotalStorage DS4000 EXP710

Attention: See note below for specific information dealing with EXP700s and EXP100s.

Important: Do not use for serial shell downloads. IBM FAStT Check Application - Fibre Channel Solutions Wed, 25 Oct 2000 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-4QFGY7 IBM FAStT Check is an application that works with the Intel Desktop Management Information (DMI) 2.0 specification. Together with the IBM FAStT Check Instrumentation, you can use IBM FAStT Check to manage and control one or more Netfinity Fibre Channel Host Bus Adapters (QLA2100) or Netfinity FAStT Host Bus Adapters (QLA2200) that are installed on local or remote computers.

You use IBM FAStT Check, in conjunction with Problem Determination Procedures (PDPs), on new or existing installations to assist in diagnosing Fibre Channel (FC) subsystem problems (in adapters, controllers, and devices that are attached to the FC loop). IBM FAStT EXP100 Firmware - Fibre Channel Solutions Thu, 18 Nov 2004 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-54116 Supported systems:
- IBM eServer xSeries 225, 235, 255, 330, 335, 342, 345, 360, 382, 440, 450
- Fibre Channel Solutions (Type 1710, 1722, 1742)
- IBM TotalStorage FAStT EXP100
- IBM TotalStorage FAStT600
- IBM TotalStorage FAStT700
- IBM TotalStorage FAStT900 IBM FAStT Fibre Channel Controller Firmware - Fibre Channel Solutions Mon, 30 Dec 2002 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-40756 This document contains the IBM FAStT Fibre Channel Controller Firmware (version 04.01.02.33) 74p4769.exe and the 74p4769.txt files. IBM FAStT Storage Manager 7.02 Migration from Storage Manager 6.22 - Fibre Channel Solutions Thu, 16 Nov 2000 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-4NAMCT 24P2827 IBM Netfinity Storage Manager 7.02 Migration from Storage Manager 6.22

Supported systems:
- IBM TotalStorage FAStT100
- IBM TotalStorage FAStT200
- IBM TotalStorage FAStT500
- IBM TotalStorage FAStT600
- IBM TotalStorage FAStT700
- IBM TotalStorage FAStT900
- IBM TotalStorage FAStT EXP100
- IBM TotalStorage FAStT EXP500
- IBM TotalStorage FAStT EXP700
- SAN Managed Hub 3534
- IBM TotalStorage SAN FC Switch
- Fibre Channel Hub and GBIC
- Fibre Channel RAID controller unit
- IBM Netfinity 5000
- IBM Netfinity 5500 M10
- IBM Netfinity 5500 M20
- IBM Netfinity 7000 M10 IBM FAStT Storage Manager device driver file matrix - Fibre Channel Solutions Thu, 31 Jan 2002 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-40752 This page will automatically redirect you to document MIGR-40751. If you are not automatically redirected, please follow the link provided below. IBM FAStT Storage Manager Fibre Channel Controller firmware - Fibre Channel Solutions Mon, 25 Nov 2002 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-43752 Supported systems:
- IBM eServer xSeries 230, 240, 250, 330, 340, 350, 360, 370
- IBM Netfinity 4500R, 5000, 5100, 5500, 5500 M10, 5500 M20, 5600, 6000R, 7000, 7100, 7600, 8500R
- IBM TotalStorage FAStT100, FAStT200, FAStT500, FAStT600, FAStT700, FAStT900
- IBM TotalStorage FAStT EXP100, FAStT EXP500, FAStT EXP700
- SAN Managed Hub 3534
- IBM TotalStorage SAN FC Switch
- Fibre Channel Hub and GBIC
- Fibre Channel RAID controller unit IBM FAStT Storage Manager Firmware for FAStT600 and FAStT900 - Servers Wed, 17 Nov 2004 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-54115 Attention: This firmware is for use only with SATA drives. It is not an upgrade for 5.40 or 5.30 firmware.

Supported systems:
- IBM eServer xSeries 225 (Type 8647), 235, 255, 330 (Type 8674), 335, 342, 345, 360, 382, 440 (8-Way), 450
- SATA Fibre Channel Solutions (Type 1722, 1742), EXP100 (Type 1710)
- IBM TotalStorage FAStT600
- IBM TotalStorage FAStT700
- IBM TotalStorage FAStT900
- IBM TotalStorage FAStT EXP100 IBM FAStT Storage Manager for AIX - Fibre Channel Solutions Mon, 25 Nov 2002 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-44361 Supported systems:
- IBM TotalStorage FAStT100
- IBM TotalStorage FAStT200
- IBM TotalStorage FAStT500
- IBM TotalStorage FAStT600
- IBM TotalStorage FAStT700
- IBM TotalStorage FAStT900
- IBM TotalStorage FAStT EXP100
- IBM TotalStorage FAStT EXP500
- IBM TotalStorage FAStT EXP700
- SAN Managed Hub 3534
- IBM TotalStorage SAN FC Switch
- Fibre Channel Hub and GBIC
- Fibre Channel RAID controller unit IBM FAStT Storage Manager for Novell NetWare 5.1 - Fibre Channel Solutions Mon, 30 Dec 2002 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-4YPQAL Supported systems:
- IBM eServer xSeries 130, 135, 150, 200, 205, 220, 225, 230, 232, 235, 240, 250, 255, 300, 305, 330, 335, 340, 342, 343, 345, 350, 360, 370, 380, 440
- IBM TotalStorage FAStT100
- IBM TotalStorage FAStT200
- IBM TotalStorage FAStT500
- IBM TotalStorage FAStT600
- IBM TotalStorage FAStT700
- IBM TotalStorage FAStT900
- IBM TotalStorage FAStT EXP100
- IBM TotalStorage FAStT EXP500
- IBM TotalStorage FAStT EXP700
- SAN Managed Hub 3534
- IBM TotalStorage SAN FC Switch
- Fibre Channel Hub and GBIC
- Fibre Channel RAID controller unit IBM FAStT Storage Manager for Solaris - Fibre Channel Solutions Mon, 25 Nov 2002 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-43750 Supported systems:
- IBM TotalStorage FAStT100
- IBM TotalStorage FAStT200
- IBM TotalStorage FAStT500
- IBM TotalStorage FAStT600
- IBM TotalStorage FAStT700
- IBM TotalStorage FAStT900
- IBM TotalStorage FAStT EXP100
- IBM TotalStorage FAStT EXP500
- IBM TotalStorage FAStT EXP700
- SAN Managed Hub 3534
- IBM TotalStorage SAN FC Switch
- Fibre Channel Hub and GBIC
- Fibre Channel RAID controller unit Sales Configuration Aid (SCA) - Servers and IntelliStation Mon, 27 Nov 2006 00:00:00 EST http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-41411 Spreadsheet Sales Configuration Aid available in Microsoft Excel format

Note: Targeted users for this configuration aid are IBM xSeries product business partner, sales, and sales support teams and some customers. To use IBM eServer and IntelliStation Sales Configuration Aid (xSCA) Version 8.15 or higher, you must install the "MSXML 4.0 SP2" component. Please refer to the readme file of the application for instructions.